Glass jar being wrapped in expanded ReGenPack kraft honeycomb paper for courier without plastic

How to Pack Glassware and Ceramics for Courier Without Plastic

Short answer: To ship glassware and ceramics without plastic, wrap each item in 2–3 layers of expanded honeycomb paper, keep items from touching each other, leave 5–7 cm of cushioning on every side of the box, fill all empty space so nothing moves, and use a strong corrugated box (5-ply for heavy or multi-item parcels). Shake test the box before sealing: if you hear or feel movement, add more paper.

Written by ReGenPack™. We manufacture honeycomb paper in Vadodara, Gujarat.

Why glass and ceramics break in transit

Most breakage doesn't come from one big drop. It comes from three things that happen again and again on the way:

  • Contact: two items touching each other inside the box chip and crack each other.
  • Movement: an item that can slide gains speed and hits the box wall.
  • Thin cushioning at corners and edges: the box gets crushed at the corners, and that's where the item is most exposed.

Good packing solves all three. The cushioning material matters, but the method matters more.

What you need

  • Honeycomb paper roll. 500 mm (20 inch) suits most glassware and ceramics. 250 mm (10 inch) suits small items such as perfume bottles, candle jars and small mugs.
  • A corrugated box with room for cushioning on all sides. Use 3-ply for single light items and 5-ply for heavy or multi-item parcels.
  • Paper tape (kraft tape) to keep the whole parcel plastic-free.
  • Optional: cardboard dividers for sets of glasses or bottles.

Step-by-step: packing one fragile item

  1. Pull and expand the paper. Pull the honeycomb paper off the roll so it opens into a 3D mesh. Expanded paper cushions; flat paper does not.
  2. Fill hollow parts first. Stuff a small piece inside glasses, mugs and vases. A filled hollow resists crushing.
  3. Protect handles, spouts and rims. Wrap these weak points with an extra piece before wrapping the whole item.
  4. Wrap 2–3 layers around the item. The mesh locks onto itself, so you don't need tape on the wrap. Use 3 layers for heavy or thin-walled glass.
  5. Bottom layer in the box. Crumple or fold honeycomb paper to make a 5–7 cm cushion at the base.
  6. Place the item in the centre. Keep 5–7 cm of space from every wall. Stand bottles and glasses upright.
  7. Fill every gap. Fill the sides and top with more paper until nothing can move.
  8. Shake test, then seal. Close the flaps and shake gently. Any movement means you need more fill. Seal with the H-taping method (centre seam plus both edges).

Packing sets and multiple items

  • Wrap every item separately. Never let glass touch glass.
  • Put heavier items at the bottom and lighter items on top.
  • Add a layer of honeycomb paper between rows.
  • For sets of 6 or more glasses or bottles, use cardboard dividers plus a wrap on each item.
  • Mark the box "Fragile" and "This side up". It doesn't guarantee careful handling, but it helps.

Common mistakes that cause breakage

  • Using the paper flat. Honeycomb paper only cushions when it is expanded.
  • A box that is too tight. If the item touches the wall, a corner crush goes straight into the glass.
  • A box that is too big with too little fill. The item slides around and hits the walls.
  • Weak paper. Low-GSM paper can tear while expanding and flatten under heavy items. For glass and ceramics, use 80–90 GSM kraft with a good burst factor.
  • Skipping the shake test. It takes two seconds and catches most packing errors.

Honeycomb paper vs bubble wrap for glass

Both work when used correctly. Honeycomb paper has three practical advantages for businesses: it's paper-based and recyclable with regular paper waste, it needs no tape to hold the wrap, and it gives a cleaner, premium unboxing look. For a full comparison, read Honeycomb Paper Wrap vs Bubble Wrap.

Frequently asked questions

How many layers of honeycomb paper do I need for glass?
Two to three layers of expanded paper for most glass and ceramic items. Use three for heavy, thin-walled or high-value pieces, and always add 5–7 cm of fill between the item and the box walls.

Can honeycomb paper replace bubble wrap for glass bottles?
Yes, when you wrap each bottle separately, stand it upright, and fill every gap so it can't move. For many bottles in one box, add cardboard dividers.

Which width of honeycomb paper is best for glassware?
500 mm (20 inch) for most glassware, ceramics and warehouse packing. 250 mm (10 inch) for small items such as perfume bottles, candle jars and small mugs.

What GSM honeycomb paper should I use for fragile items?
80–90 GSM kraft paper is the common choice for fragile e-commerce shipments. Also check the burst factor, which tells you how strong the paper is.

Is honeycomb paper recyclable?
Yes. It is kraft paper, so it goes into the regular paper recycling stream.

Try it on your own products

ReGenPack™ makes honeycomb paper from 80–90 GSM kraft with a 24–30+ burst factor, in 500 mm and 250 mm widths, with a GST invoice on every order. If you ship glassware or ceramics, tell us what you pack and we'll send a free 25 m sample roll to test on your packing floor. Call +91 91305 04823 or email info@regenpack.in.

Back to blog